Going from a Seagate 15k.4 73GB to a Seagate 15.5 146GB. The new disk has 16MB cache (twice as much as the 15k.4). Had some issues with a SCA-68 pin converter (gave all the LUNS), but a SCA-50pin/68pin converter worked perfectly. It's hooked up on the external bus and cloning as I type this. The 15k.5 seems to have a quieter muffled sound, but until I put it inside the O2 I'll be able to compare the sound.
Can't seem to remember the name of the command that checks out how many hours the drive has on it....can anyone help out?
EDIT> found it....here's the output of both drives after cloning:
Code:
Select all
negev 1# scsimon /dev/scsi/sc0d2l0
Inquiry response: [SEAGATE ST373454LC 0003]
Current temperature: 50C/122F
Maximum temperature: 68C/154F
Drive uptime (total): 106190 minutes (= 73d 17h 50m)
Next internal test in: 34 minutes
Self-test data (newest first):
0: at: 60h type: bg short result: completed OK
negev 2# scsimon /dev/scsi/sc1d2l0
Inquiry response: [SEAGATE ST3146855LC 0003]
Current temperature: 59C/138F
Maximum temperature: 68C/154F
Drive uptime (total): 124 minutes (= 0d 2h 4m)
Next internal test in: 31 minutes
Self-test data (newest first):
O2 seems to boot faster with the new drive...but it could be my imagination.