Nekonomicon - nekonoko

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of iMac thoughts? at Jan. 7, 2010, 6:45 a.m...

recondas wrote:

As smooth as the change might have appeared to the those of us using nekochan, I'm sure it involved a significant amount of planning and effort to implement. Thanks for all the hard work!

Yep; it took about a week - most of it in configuration details. The IRC server was a newer version for example, so I had to translate the old, incompatible configuration file into the new format.

recondas wrote:

So, are there plans for a VPro in Wadatsumi's immediate future?

Maybe not immediate, but yeah - now I can play around with that hardware and have some fun with it

_________________
私のホバークラフトは鰻が一杯です。
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
From Pleasanton, California
Who joined Jan. 23, 2003, 1:31 a.m.

Wrote on the subject of Porting libtorrent/rtorrent at Jan. 7, 2010, 8:52 a.m...

canavan wrote: neko_curl-7.19.7.tardist and a neko_libtorrent-0.12.6.tardist are in /incoming.

Any chance for a reupload? I neglected to check /incoming before the server move.

Twitter: @neko_no_ko
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
From Pleasanton, California
Who joined Jan. 23, 2003, 1:31 a.m.

Wrote on the subject of Porting libtorrent/rtorrent at Jan. 7, 2010, 9:44 a.m...

foetz wrote: new server?
i noticed that the 'server info' page is empty now ...

Yeah, I'll probably just remove that link.

Twitter: @neko_no_ko
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
From Pleasanton, California
Who joined Jan. 23, 2003, 1:31 a.m.

Wrote on the subject of Porting libtorrent/rtorrent at Jan. 7, 2010, 12:15 p.m...

Great, both are now in /beta. Thanks much!

Twitter: @neko_no_ko
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of Nekochan.net operating costs? at Jan. 8, 2010, 9:30 a.m...

japes wrote:

So that Atom server must be a bit quieter than the 2-node O350, and come summer the reduced heat/power should be nice I imagine.

No more dull roar from the spare bedroom; it's eerily quiet around here

_________________
私のホバークラフトは鰻が一杯です。
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of iMac thoughts? at Jan. 8, 2010, 10:22 a.m...

fu wrote:

hex! i thought that you were joking neko

When all is said and done, if the performance and end-user experience hadn't been there I wouldn't have gone through with it. I throughly tested everything beforehand to ensure it would be a smooth and seamless transition

fu wrote:

(if you get bored of the tezro i'll take it together with that orange book

)

Heh, I'm not abandoning the old beasties just yet, just cutting back on 24/7 power usage and noise

_________________
私のホバークラフトは鰻が一杯です。
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of Nekochan.net operating costs? at Jan. 9, 2010, 2:49 a.m...

...

_________________
私のホバークラフトは鰻が一杯です。
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 9:31 a.m.
and authored 7668 notes

Wrote on the subject of Getting AHCI Enabled Windows XP Boot Camp Installation at Jan. 9, 2010, 7:58 a.m...

I'd forgotten about this post, but I did recently enable AHCI under 64-bit Windows 7 Ultimate on my Mac Pro for Blu-ray support. The process wasn't quite as involved though - I followed the guide here:

http://forums.macrumors.com/showthread.php?t=760482

_________________
私のホバークラフトは鰻が一杯です。
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 9:31 a.m.
and authored 7668 notes

Wrote on the subject of Getting AHCI Enabled Windows XP Boot Camp Installation at Jan. 9, 2010, 4:12 p.m...

skywriter wrote:

hrm... i downloaded macports, and it seems to be going ahead based on that rather than darwin ports.
i forgot to mention this is a snow leopard 10.6.2. i'll be doing the mini with leopard 10.5.8 if it makes sense after this experiment. the mini is the real platform.

I've had good luck with macports, as far as I'm aware darwin ports has been discontinued/deprecated.

For many years I used the 'fink' package manager for this sort of thing (it's similar in concept) but ultimately found macports to have fewer gotchas.

_________________
私のホバークラフトは鰻が一杯です。
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of Nekochan not resolving? at Jan. 13, 2010, 1:06 p.m...

Whichever works for ya - 8.8.8.8 is easy to remember though

OpenDNS results:

Code:

  $ nslookup www.nekochan.net 208.67.222.222
  
  Server:      208.67.222.222
  
  Address:   208.67.222.222#53
  
  Non-authoritative answer:
  
  Name:   www.nekochan.net
  
  Address: 64.81.247.28
  
  $ nslookup www.nekochan.net 208.67.220.220
  
  Server:      208.67.220.220
  
  Address:   208.67.220.220#53
  
  Non-authoritative answer:
  
  Name:   www.nekochan.net
  
  Address: 64.81.247.28

_________________
私のホバークラフトは鰻が一杯です。
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of Nekochan not resolving? at Jan. 13, 2010, 7:30 p.m...

I saw Baidu crawling the site today - first I'd noticed that.

_________________
私のホバークラフトは鰻が一杯です。
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of Nekochan not resolving? at Jan. 13, 2010, 7:55 p.m...

Baidu/Google aside, you posted the traceroute issue right after the system had come back up from a reboot (down for a minute or two for a brief config test). Hopefully it was due to that

_________________
私のホバークラフトは鰻が一杯です。
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of Nekochan not resolving? at Jan. 14, 2010, 8:02 a.m...

Ah okay

_________________
私のホバークラフトは鰻が一杯です。
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of macbook nekochan login loop at Jan. 14, 2010, 8:26 a.m...

If this is still going on I can try updating the cookie domain from "forums.nekochan.net" to ".nekochan.net". Only problem with this is everyone will need to delete their old "forums.nekochan.net" cookies afterwards to prevent login loops on every browser and OS.

_________________
私のホバークラフトは鰻が一杯です。
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7590 notes

Wrote on the subject of Looking for P-Bricks at Jan. 14, 2010, 12:36 p.m...

sybrfreq wrote:

How bad is your red fever?

Must be pretty bad - he spammed me on my YouTube account.

_________________
私のホバークラフトは鰻が一杯です。
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7590 notes

Wrote on the subject of Looking for P-Bricks at Jan. 14, 2010, 1:18 p.m...

Yep - not looking to sell it though.

_________________
私のホバークラフトは鰻が一杯です。
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7590 notes

Wrote on the subject of Looking for P-Bricks at Jan. 14, 2010, 1:22 p.m...

Heh, you have any videos of your Crimson on there?

_________________
私のホバークラフトは鰻が一杯です。
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7590 notes

Wrote on the subject of Looking for P-Bricks at Jan. 14, 2010, 1:29 p.m...

Ah, you're okay then

I got hit as the only video I have on there is of my Crimson booting.

_________________
私のホバークラフトは鰻が一杯です。
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of Nekochan is in the future at Jan. 14, 2010, 9:17 p.m...

Go in to your profile and set "Summer Time/DST is in effect: No" (you currently have it set to "Yes"; I checked).

_________________
私のホバークラフトは鰻が一杯です。
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of Nekochan is in the future at Jan. 14, 2010, 10:45 p.m...

No, there's no automatic setting for it - you have to set that option manually whenever you have a local time change. phpBB3 would need to expand time zone support beyond simple GMT+/-X (weird stuff like MST in Arizona would need to be considered) in order to provide that level of control.

_________________
私のホバークラフトは鰻が一杯です。
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of Nekochan on D510MO at Jan. 15, 2010, 2:11 p.m...

I've ordered a D510MO to play with - just couldn't resist

_________________
私のホバークラフトは鰻が一杯です。
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of Nekochan on D510MO at Jan. 15, 2010, 5:13 p.m...

I expect mine on Thursday according to the tracking info. I'm looking forward to getting everything up and running sometime that evening; shouldn't take long.

_________________
私のホバークラフトは鰻が一杯です。
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of Nekochan on D510MO at Jan. 16, 2010, 7:32 a.m...

japes wrote:

For now I have more junk than I need and more projects than time

Same here, but I'm keeping the clutter down by just swapping the D945GCLF for the D510MO. As long as it works, I'll pass the D945GCLF board and RAM on to someone else.

_________________
私のホバークラフトは鰻が一杯です。
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of Nekochan on D510MO at Jan. 16, 2010, 5:41 p.m...

Thanks! I'll post a separate topic on the D510MO once I get it running. I'll try and remember to take some photos while I'm at it.

That XP 2400+ is definitely a good target for replacement with something like this - you'll save on electricity, keep the temps down in the room and gain the ability to run a 64-bit OS.

_________________
私のホバークラフトは鰻が一杯です。
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of wiki database error at Jan. 17, 2010, 6:47 a.m...

Fixed

_________________
私のホバークラフトは鰻が一杯です。
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of wiki database error at Jan. 18, 2010, 10:41 a.m...

squeen wrote:

What was the fix?

Code:

  # myisamchk --silent --force --fast --update-state searchindex.MYI
  
  myisamchk: MyISAM file searchindex.MYI
  
  myisamchk: warning: Table is marked as crashed
  
  myisamchk: warning: 2 clients are using or haven't closed the table properly
  
  # php rebuildall.php
  
  ** Rebuilding fulltext search index (if you abort this will break searching; run this script again to fix):
  
  Dropping index...
  
  Rebuilding index fields for 1992 pages...
  
  1500
  
  Rebuild the index...
  
  ** Rebuilding recentchanges table:
  
  Loading from page and revision tables...
  
  $wgRCMaxAge=604800 (7 days)
  
  Updating links and size differences...
  
  Loading from user, page, and logging tables...
  
  Flagging bot account edits...
  
  Flagging auto-patrolled edits...
  
  ** Rebuilding links tables -- this can take a long time. It should be safe to abort via ctrl+C if you get bored.
  
  Refreshing links table.
  
  Starting from page_id 1 of 1992.
  
  100
  
  200
  
  300
  
  400
  
  500
  
  600
  
  700
  
  800
  
  900
  
  1000
  
  1100
  
  1200
  
  1300
  
  1400
  
  1500
  
  1600
  
  1700
  
  1800
  
  1900
  
  Done.

It's the only MyISAM table I'm still using; I moved nearly everything to InnoDB years ago to prevent splats like that.

That table may have been marked as crashed before the server move - there was a power outage a couple weeks ago that dropped the O350 on its butt (another advantage of a smaller system is I can keep it up on a UPS nearly indefinitely). If it happens again for some reason I'll see about moving that table to InnoDB as well.

Edit: Bummer. According to the MediaWiki docs, the searchindex has to be MyISAM. Guess that's why I left it that way

Interestingly, I found this via Google:

Quote:

TODO: MediaWiki’s MySQL search backend
Some problems and solutions…

...

Problem 2: The table crashes sometimes

People often get mystified when the searchindex table is marked crashed.

Catch the error: try a REPAIR TABLE transparently, and display a friendlier error if that fails.

...

... this is apparently a known issue.

_________________
私のホバークラフトは鰻が一杯です。
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of wiki database error at Jan. 19, 2010, 11:28 a.m...

Not a problem! I wouldn't worry about it too much - the searchindex is a throw-away table in that it can be regenerated from scratch in just a few seconds using the 'rebuildall' script. It's not critical by any means.

_________________
私のホバークラフトは鰻が一杯です。
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 1:31 a.m.
and authored 7947 notes

Wrote on the subject of In Japan this week at Jan. 20, 2010, 5:30 p.m...

skywriter wrote:

pix!

Do they have booth babes at a fiber optics show?

_________________
Twitter: @neko_no_ko
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of Nekochan on D510MO at Jan. 24, 2010, 2:16 p.m...

Okay, I've split the D510MO discussion off from the previous thread instead of starting a new topic.

My D510MO board arrived on Thursday and I was able to get it up and running that evening.

The swap out was fairly painless, though I did run into a problem with my existing Micro-ATX power supply only supporting 20-pins rather than the 24-pins required for the D510MO. A quick dash to the local Fry's Electronics remedied that particular issue. On the software side, I had to edit the root mount in /etc/fstab (edit: not necessary if using UFS device labels) and adjust the system clock (was approximately 24-hours ahead out of the box). FreeBSD had no issues with the hardware and continues to work just fine with the generic amd64 kernel.

Here's the FreeBSD 'dmesg' output from the D510MO:

Code:

  Copyright (c) 1992-2009 The FreeBSD Project.
  
  Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  
  The Regents of the University of California. All rights reserved.
  
  FreeBSD is a registered trademark of The FreeBSD Foundation.
  
  FreeBSD 8.0-RELEASE-p2 #0: Tue Jan  5 21:11:58 UTC 2010
  
  root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC
  
  Timecounter "i8254" frequency 1193182 Hz quality 0
  
  CPU: Intel(R) Atom(TM) CPU D510   @ 1.66GHz (1676.69-MHz K8-class CPU)
  
  Origin = "GenuineIntel"  Id = 0x106ca  Stepping = 10
  
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  
  Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,<b22>>
  
  AMD Features=0x20100800<SYSCALL,NX,LM>
  
  AMD Features2=0x1<LAHF>
  
  TSC: P-state invariant
  
  real memory  = 4294967296 (4096 MB)
  
  avail memory = 4090068992 (3900 MB)
  
  ACPI APIC Table: <INTEL  MOPNV10J>
  
  FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
  
  FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 HTT threads
  
  cpu0 (BSP): APIC ID:  0
  
  cpu1 (AP/HT): APIC ID:  1
  
  cpu2 (AP): APIC ID:  2
  
  cpu3 (AP/HT): APIC ID:  3
  
  ioapic0: Changing APIC ID to 8
  
  ioapic0 <Version 2.0> irqs 0-23 on motherboard
  
  lapic0: Forcing LINT1 to edge trigger
  
  kbd1 at kbdmux0
  
  acpi0: <INTEL MOPNV10J> on motherboard
  
  acpi0: [ITHREAD]
  
  acpi0: Power Button (fixed)
  
  Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
  
  acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
  
  acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
  
  Timecounter "HPET" frequency 14318180 Hz quality 900
  
  acpi_button0: <Sleep Button> on acpi0
  
  pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
  
  pci0: <ACPI PCI bus> on pcib0
  
  vgapci0: <VGA-compatible display> port 0x30c0-0x30c7 mem 0xf0300000-0xf037ffff,0xe0000000-0xefffffff,0xf0200000-0xf02fffff irq 16 at device 2.0 on pci0
  
  pci0: <multimedia, HDA> at device 27.0 (no driver attached)
  
  pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
  
  pci1: <ACPI PCI bus> on pcib1
  
  re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8168DP/8111B/8111C/8111CP/8111DP PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xf0004000-0xf0004fff,0xf0000000-0xf0003fff irq 16 at device 0.0 on pci1
  
  re0: Using 1 MSI messages
  
  re0: Chip rev. 0x28000000
  
  re0: MAC rev. 0x00000000
  
  miibus0: <MII bus> on re0
  
  rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
  
  rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
  
  re0: Ethernet address: 00:27:0e:07:61:eb
  
  re0: [FILTER]
  
  pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
  
  pci2: <ACPI PCI bus> on pcib2
  
  pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
  
  pci3: <ACPI PCI bus> on pcib3
  
  pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
  
  pci4: <ACPI PCI bus> on pcib4
  
  uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x3080-0x309f irq 23 at device 29.0 on pci0
  
  uhci0: [ITHREAD]
  
  uhci0: LegSup = 0x0f10
  
  usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
  
  uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x3060-0x307f irq 19 at device 29.1 on pci0
  
  uhci1: [ITHREAD]
  
  uhci1: LegSup = 0x0f10
  
  usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
  
  uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x3040-0x305f irq 18 at device 29.2 on pci0
  
  uhci2: [ITHREAD]
  
  uhci2: LegSup = 0x0f10
  
  usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
  
  uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x3020-0x303f irq 16 at device 29.3 on pci0
  
  uhci3: [ITHREAD]
  
  uhci3: LegSup = 0x0f10
  
  usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
  
  ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xf0384400-0xf03847ff irq 23 at device 29.7 on pci0
  
  ehci0: [ITHREAD]
  
  usbus4: EHCI version 1.0
  
  usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
  
  pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
  
  pci5: <ACPI PCI bus> on pcib5
  
  siis0: <SiI3124 SATA2 controller> port 0x1000-0x100f mem 0xf0108000-0xf010807f,0xf0100000-0xf0107fff irq 21 at device 0.0 on pci5
  
  siis0: [ITHREAD]
  
  siisch0: <SIIS channel> at channel 0 on siis0
  
  siisch0: [ITHREAD]
  
  siisch1: <SIIS channel> at channel 1 on siis0
  
  siisch1: [ITHREAD]
  
  siisch2: <SIIS channel> at channel 2 on siis0
  
  siisch2: [ITHREAD]
  
  siisch3: <SIIS channel> at channel 3 on siis0
  
  siisch3: [ITHREAD]
  
  isab0: <PCI-ISA bridge> at device 31.0 on pci0
  
  isa0: <ISA bus> on isab0
  
  ahci0: <AHCI controller> port 0x30b8-0x30bf,0x30cc-0x30cf,0x30b0-0x30b7,0x30c8-0x30cb,0x30a0-0x30af mem 0xf0384000-0xf03843ff irq 19 at device 31.2 on pci0
  
  ahci0: [ITHREAD]
  
  ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported
  
  ahcich0: <AHCI channel> at channel 0 on ahci0
  
  ahcich0: [ITHREAD]
  
  ahcich1: <AHCI channel> at channel 1 on ahci0
  
  ahcich1: [ITHREAD]
  
  pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
  
  atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
  
  ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
  
  ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
  
  ppc0: FIFO with 16/16/16 bytes threshold
  
  ppc0: [ITHREAD]
  
  ppbus0: <Parallel port bus> on ppc0
  
  plip0: <PLIP network interface> on ppbus0
  
  plip0: [ITHREAD]
  
  lpt0: <Printer> on ppbus0
  
  lpt0: [ITHREAD]
  
  lpt0: Interrupt-driven port
  
  ppi0: <Parallel I/O> on ppbus0
  
  uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
  
  uart1: [FILTER]
  
  uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
  
  uart0: [FILTER]
  
  cpu0: <ACPI CPU> on acpi0
  
  p4tcc0: <CPU Frequency Thermal Control> on cpu0
  
  cpu1: <ACPI CPU> on acpi0
  
  p4tcc1: <CPU Frequency Thermal Control> on cpu1
  
  cpu2: <ACPI CPU> on acpi0
  
  p4tcc2: <CPU Frequency Thermal Control> on cpu2
  
  cpu3: <ACPI CPU> on acpi0
  
  p4tcc3: <CPU Frequency Thermal Control> on cpu3
  
  orm0: <ISA Option ROM> at iomem 0xce000-0xcefff on isa0
  
  sc0: <System console> at flags 0x100 on isa0
  
  sc0: VGA <16 virtual consoles, flags=0x300>
  
  vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
  
  atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
  
  atkbd0: <AT Keyboard> irq 1 on atkbdc0
  
  kbd0 at atkbd0
  
  atkbd0: [GIANT-LOCKED]
  
  atkbd0: [ITHREAD]
  
  Timecounters tick every 1.000 msec
  
  Waiting 5 seconds for SCSI devices to settle
  
  usbus0: 12Mbps Full Speed USB v1.0
  
  usbus1: 12Mbps Full Speed USB v1.0
  
  usbus2: 12Mbps Full Speed USB v1.0
  
  usbus3: 12Mbps Full Speed USB v1.0
  
  usbus4: 480Mbps High Speed USB v2.0
  
  ugen0.1: <Intel> at usbus0
  
  uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
  
  ugen1.1: <Intel> at usbus1
  
  uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
  
  ugen2.1: <Intel> at usbus2
  
  uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
  
  ugen3.1: <Intel> at usbus3
  
  uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
  
  ugen4.1: <Intel> at usbus4
  
  uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
  
  uhub0: 2 ports with 2 removable, self powered
  
  uhub1: 2 ports with 2 removable, self powered
  
  uhub2: 2 ports with 2 removable, self powered
  
  uhub3: 2 ports with 2 removable, self powered
  
  uhub4: 8 ports with 8 removable, self powered
  
  (aprobe4:ahcich0:0:0:0): SIGNATURE: 0000
  
  (aprobe5:ahcich1:0:0:0): SIGNATURE: 0000
  
  ada0 at ahcich0 bus 0 target 0 lun 0
  
  ada0: <WDC WD1001FALS-00J7B1 05.00K05> ATA/ATAPI-8 SATA 2.x device
  
  ada0: 300.000MB/s transfers
  
  ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
  
  ada0: Native Command Queueing enabled
  
  ada1 at ahcich1 bus 0 target 0 lun 0
  
  ada1: <WDC WD1001FALS-00J7B0 05.00K05> ATA/ATAPI-8 SATA 2.x device
  
  ada1: 300.000MB/s transfers
  
  ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
  
  ada1: Native Command Queueing enabled
  
  lapic1: Forcing LINT1 to edge trigger
  
  SMP: AP CPU #1 Launched!
  
  lapic2: Forcing LINT1 to edge trigger
  
  SMP: AP CPU #2 Launched!
  
  lapic3: Forcing LINT1 to edge trigger
  
  SMP: AP CPU #3 Launched!
  
  GEOM_MIRROR: Device mirror/gm0 launched (2/2).
  
  ugen1.2: <CPS> at usbus1
  
  Trying to mount root from ufs:/dev/mirror/gm0s1a
  
  ugen1.3: <USB KEYBOARD> at usbus1
  
  ukbd0: <USB KEYBOARD USB KEYBOARD, class 0/0, rev 1.10/1.01, addr 3> on usbus1
  
  kbd2 at ukbd0
  
  ums0: <USB KEYBOARD USB KEYBOARD, class 0/0, rev 1.10/1.01, addr 3> on usbus1
  
  ums0: 3 buttons and [XYZ] coordinates ID=1
  
  IP Filter: v4.1.28 initialized.  Default = block all, Logging = enabled
  
  re0: link state changed to UP

_________________
私のホバークラフトは鰻が一杯です。
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of Nekochan on D510MO at Jan. 24, 2010, 2:34 p.m...

Sure, it's an Apex MI-100 case:

http://www.newegg.com/Product/Product.a ... 6811154084

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of Nekochan on D510MO at Jan. 25, 2010, 9:23 a.m...

mgtremaine wrote:

Very nice! Hopefully it wasn't raining too hard when you were getting the 24pin converter.

It was coming down pretty good a the time

Fortunately I didn't encounter any accidents during the trip.

mgtremaine wrote:

I can't quite see from the pic but the HDdrive [750GB] is under the DVD, I assume the case has just one drive bracket.

It has two; there's also a side-mounted 3.5" bracket. You can see the screw holes for it on the top pic on the side closest to the camera and in the second pic, on the left. If you were to forgo the DVD you could easily mount 3 hard drives in the case, though the D510MO only has two SATA ports on board. I suppose you could find something to fit in the PCI slot to make up for that.

mgtremaine wrote:

Also the only fan is in the power supply as far as I can tell, what do you think of the stock power supply from that APEX MI-100 case?

This is the same case my parents were using for the original Atom Hackintosh; the original power supply blew up on me after 48 hours or so. I wound up replacing it with a locally sourced supply out of Bend, Oregon which was kind of an adventure in itself. Reading through recent comments on NewEgg it doesn't look like power supply problems are too common though.

henrycault wrote:

I didn't check but is it still a Realtek LAN card on-board? I had to drop a Intel PRO1000/MT in mine for network stability

It has Realtek gigabit on board. I hadn't encountered any stability issues with the 100mbit Realtek on the previous board, and I have the same gigabit chipset rev as this on my i7 daily driver.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of Nekochan on D510MO at Jan. 25, 2010, 11:57 a.m...

Megatron-UK wrote:

Talking of saving money on electricity bills, I just rebuilt my home server from dual AMD Athlon MP 2800+'s that I've had for years, to a single high-efficiency Athlon X3 400e (unlocked from 3 to 4-cores; detects and works correctly as an X4 6400e). The MP's are 65w TDP each , and the X3 is 45w TDP, total . I also swapped from 8 x 7200rpm 500GB and 4 x 7200rpm 320GB SATA drives to 5 new Samsung Eco 1.5TB drives.

I run the server from a 700VA APC ups... previously it ran from two 650w power supplies (one for the board and 4x320GB drives, the other for the 8x500GB drives) it would light up all 5 of it's power-useage-level led's on boot-up of the server, and settle at 3-4 led's during running. The same ups now momentarily flashes a single led on power up, and shows no led's during normal running! I'm amazed at the power requirements of the new setup and how much cooler the whole thing runs (I've been able to turn off the majority of cooling fans and run the rest of them at 5-7v, instead of 12v).

Sounds like a fantastic setup!

It sure is nice that all this new hardware is available with decent performance that doesn't nuke the UPS, superheat the room, assail with noise and swamp the power bill. It will be interesting to see the bill in February; I'm expecting the system will pay for itself quite rapidly.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of Nekochan on D510MO at Jan. 25, 2010, 9:42 p.m...

hamei wrote:

Now we're all excited about running servers on an Atom ? I agree, it is cool, but why did SGI have to go tits-up then ?

Because it's not just the speed we're looking at here - it's the power requirement. SGI never offered systems that ran on a handful of watts.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of Nekochan on D510MO at Jan. 25, 2010, 10:10 p.m...

hamei wrote:

I can't help but think that more foresight on management's part would have found this niche years ago. Intel didn't want to do this - they like selling the big $$ products. This is something driven by real demand, just like the netbooks. We're back to the dead horse but this move to Atoms ? It's neat. And it's exactly what Alex Cousein was pushing in 1998. This could have been MIPS.

Yep. They started to look at that before their latest bankruptcy - the SGI Molecule was a supercomputing design based on Atom 330 CPUs:

http://gizmodo.com/5091473/sgi-molecule ... wesomeness

http://www.sgi.com/company_info/newsroo ... elvin.html

hamei wrote:

Anyone know what heppened to him, btw ? Pretty nice guy.

Don't know - hopefully something good though.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of SGI Art Gallery at Jan. 25, 2010, 10:49 p.m...

87Porsche wrote:

Has anyone seen this yet? The Third & The Seventh.

http://www.vimeo.com/7809605

Amazing to say the least.

Very nice! If he doesn't have a job in the industry yet, that certainly would make for a killer demo reel

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of Nekochan on D510MO at Jan. 26, 2010, 10:40 p.m...

I've updated the dmesg info in my previous post. This evening I enabled AHCI support and switched over to UFS ID labels, so I no longer need to edit /etc/fstab if the boot device name changes.

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of Nekochan on D510MO at Jan. 28, 2010, 10:30 a.m...

hamei has stale CSS - needs to force refresh or clear the cache

The update is due to moving to Movable Type 5; I didn't do much more than that. Thanks though

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote on the subject of Nekochan on D510MO at Jan. 28, 2010, 8:32 p.m...

Hey, if it works for ya that's cool - I don't mind if your CSS is stale

nekonoko
Site Admin
Who joined Jan. 23, 2003, 1:31 a.m.
and authored 7947 notes

Wrote on the subject of Has anyone ever seen CHU-HI or Deeppresso in the US? at Jan. 28, 2010, 10:51 p.m...

Ack, I was at Nijiya last weekend buying drinks and snacks and completely forgot to check for this stuff. Sorry about that!

nekonoko
Site Admin
Who joined Jan. 23, 2003, 1:31 a.m.
and authored 7947 notes

Wrote on the subject of In Japan this week at Feb. 1, 2010, 7:08 a.m...

Ah, that's where I've seen that building before

The collected works of nekonoko - Page 17